Will a powerflush extend my heating boiler lifetime
Will a powerflush extend my heating boiler lifetime
There is a tendency for deposits to build up within older systems. efficiency suffers and will continue to decline as a contaminants develops. Flushing the gas fired boiler and central heating system will address the problem.
The buildup of sediment can be counteracted by a commercial cleansing process known as a powerflush.
Any heating system can develop this sediment problem over time, the main influence is the passage of time and hence the older your heating system the more likely it is to have this problem. If you are replacing major components in your heating system you should consider a power-flush to help them operate in the optimal conditions. As the sludge and general dirt are disturbed in the new installation it will find its way into your new boiler and reduce its effectiveness and life span.
The DIY stores sell corrosion inhibitor which you can add your heating system to slow deposits build up.
powerflushing your central heating system can also help with some of the other issues it can experience as outlined below : -
* some central heating radiators suffering from cold spots
* accumulation of deposits within the gas boiler
* contamination build up in the central heating water pump
* gas boiler and central heating system pipework sediment
* corrosion attack inside the boiler and central heating system
* reduced water circulation through blockages
* knocks and bangs emanating from the system
As a result the benefits of the power-flush could be :-
* increased pump life as your water pump handles clear water instead of contamination
* curing radiator cold points so that the full surface of the heating radiator heats your room
* reduced heating bills as gas boiler and central heating system efficiency is improved
* better heat exchanger operation lowering energy consumption
* improved heating radiator heat transmission and extended lifetime
* clearing your heating system of contaminated water which could lead to heating system corrosion
The heating boiler and central heating system cleansing is carried out through using an automated power flush simple machine. The central heating system deposits is filtered out as it is routed through the machine. At the same time new liquid is fed into your heating system. As the process is finished the engineer will normally add a corrosion inhibitor to the heating system.
Trained engineers perform the power-flush to see to it that it operates correctly and delivers the required benefits.